Online Ukulele Tuner
Tune soprano, concert, tenor and baritone ukulele in standard gCEA, low G or DGBE. Mic detection plus string-by-string reference tones.
--
Press Start to begin tuning
Works best in a quiet environment. Use headphones if playing back audio to avoid feedback.
Online ukulele tuner: high G, low G and baritone presets
A standard soprano, concert or tenor ukulele usually uses re-entrant gCEA. The first string listed, the G nearest your face in playing position, sounds higher than the following C. Its note is G4, not G3. That octave distinction matters: a tuner that labels G3 as standard would direct you to a low-G setup. Choose standard high G, low G or baritone DGBE above before checking individual strings. The microphone display and reference buttons follow the chosen pattern rather than just showing any chromatic note.
Standard re-entrant gCEA
The four open notes, in string order from the top string you hold, are G4, C4, E4 and A4. Their frequencies at A4 = 440 Hz are approximately 392.00, 261.63, 329.63 and 440.00 Hz. Notice that the second string, C4, is the lowest pitch in this set. That is what re-entrant means here. Kala's ukulele tuning guide identifies high-gCEA as standard for soprano, concert and tenor sizes. If your G sounds below C, check whether your instrument has a low-G string installed instead of tightening it toward G4.
Low G and baritone are different jobs
The low-G preset changes only G4 to G3. That is an entire octave down, from about 392 Hz to 196 Hz, while C4, E4 and A4 stay put. Low G usually needs the right string; do not force a normal high-G string down an octave and expect the same feel. Baritone ukulele generally uses D3, G3, B3 and E4. This is a different interval and register from standard gCEA. Kala's baritone guide explains the DGBE pattern. Select the preset that matches the instrument and strings you actually have.
Compare by ear or by microphone
Tap a numbered string button to hear its sine reference for up to 8 seconds. These tones come from the shared browser tone player and follow the A4 calibration slider. Listen at low volume, then stop the reference before measuring with the microphone if your speakers feed back into it. Start Tuning requests microphone permission. Pluck one open string and let it ring; the display shows the nearest open-string target in your selected tuning. The tuning buttons do not identify which physical string you touched. You need to know which one you are checking.
Reading a sharp or flat result
The large note shows the pitch the microphone is hearing. The target line shows the nearest open string from the chosen preset, and the cents number tells you how far the two are apart. Positive cents means sharp, and negative cents means flat. A difference of 100 cents is a semitone. If your display says G3 while the selected preset targets G4, that is an octave difference, not a five-cent adjustment. Change to the low-G preset if your ukulele is strung for it. The frequency calculator can help you check exact note numbers at other A4 settings.
A useful order for tuning
Start with C, then E and A, and finish with the top G if you are not sure whether it is high or low. Listening to the C and G reference tones makes the octave difference easier to spot. After all four strings look stable, strum once and play each string again. New nylon strings stretch and often need several passes. Turn pegs gently and avoid a sudden large adjustment. If the string is very far away from the intended pitch, trust the labeled note and your ear before chasing a small needle movement. A tuner cannot compensate for the wrong gauge of string.
Why this page has a narrower pitch window
This tuner listens around the open pitches in the selected ukulele preset, with some space for a flat or sharp string. A fretted melody note outside that window will not appear as if it were an open string. A harmonic can still produce a misleading reading, especially if the instrument is quiet or there is music in the room. For melodies, alternate tunings not listed here or other instruments, switch to the chromatic tuner. The ukulele page is designed for the specific open strings shown above, including the different octaves of G.
What stays on your device
The microphone audio is analyzed in your browser and is not uploaded or saved by this tool. Reference tones are generated locally and stop on their own after eight seconds. A noisy room, weak microphone or speaker playback can still change the estimate. If readings wander, move away from the speaker and play a single sustained string. If you are preparing a live set, put the chosen tuning in your setlist notes so you know which ukulele or string set to bring. The tool shows a tuning target, not a warranty that the instrument is correctly set up.