High-Frequency Hearing Check

Listen to a series of short tones and record the highest one you heard. Not a clinical hearing test.

Set a comfortable, low volume at 1,000 Hz and keep it unchanged. Use a quiet room. Never raise the volume to hear a higher tone.

This is a casual playback check, not a clinical hearing test. Headphones, speakers, sound settings and ambient noise can limit high frequencies. It cannot diagnose hearing loss.

Step 1 of 10: 1,000 Hz

You can replay a step before answering.

High-frequency hearing check: what an online tone can tell you

This page steps through tones from 1,000 Hz up to 18,000 Hz. You mark each tone as heard or not heard, and the tool reports the highest frequency you marked as heard. That is a record of your responses in this setup. It is not a clinical threshold, a hearing age or a diagnosis. Start at a comfortable low volume at 1,000 Hz and do not change it while moving through the higher tones.

Set up the listening environment

Use a quiet room and headphones you already know. Turn off equalizers or sound enhancements if you can do so without disrupting other tasks. Begin at a comfortable level. Do not raise the volume just to hear a later tone. Different headphones have different high-frequency response, and Bluetooth codecs or the operating system can filter sound. An older laptop speaker may not reproduce 16,000 Hz well even for a listener who can hear that frequency on other equipment. If you want to check whether each side of your headphones works, use the channel and speaker test first.

How the steps work

Each step plays a 1.5-second sine tone. You can replay it before choosing "I heard it" or "I did not hear it." The first "did not hear it" answer ends the sequence. The highest tone you marked as heard is displayed at the end. The steps are not evenly spaced in pitch, and the sequence does not measure your minimum audible loudness at any frequency. A real audiogram changes level as well as frequency and tests each ear separately with calibrated equipment. You can explore a single frequency at low volume using the tone generator, but that also is not an audiogram.

Why one result can change

A high tone may be masked by a fan, street noise or another sound in the room. The same headset may sound different when connected to another device. Placement of the earpads, hearing fatigue and even a browser audio setting can change what you report. Repeating the test can produce a different number without any actual change in hearing. This page does not compare your result with an age chart because such comparisons would imply a level of accuracy that a browser and uncalibrated headphones do not have.

Safety and limits

The playback level is intentionally modest, but the device volume still controls what reaches your ears. Stop if a tone is uncomfortable. Never use a louder setting to chase a higher number. The US National Institute on Deafness and Other Communication Disorders hearing tests guide describes professional tests and what their results mean. If you notice sudden hearing loss, persistent ringing or one-sided symptoms, contact a qualified clinician. An online frequency check cannot rule out those conditions.

What to do with the number

Treat it as a note about one device at one listening level. Record the headphones, room and volume setting if you want to repeat a casual comparison later. Do not use it to set safe concert volume or diagnose a friend. The decibel meter uses a microphone for rough sound-level observations, but phones and laptops are not calibrated medical or occupational instruments either. For more about hearing protection, read the World Health Organization fact sheet on hearing loss. A professional hearing assessment is the appropriate next step for a real concern.

Understand the difference between pitch and loudness

Frequency is the number of oscillations per second; loudness depends on signal level, your playback system and your own sensitivity. A 12,000 Hz tone that is inaudible at one volume may be audible at another. That is exactly why a single maximum-frequency claim is not a medical result. Musical content also carries harmonics and varying levels, which makes it harder to compare with a single sine wave. If you are analyzing the frequency content of a recording rather than your own listening response, the spectrum analyzer is the more relevant tool.

Why the result is not a hearing age

People often search for a number that supposedly tells them how old their hearing is. A single audible frequency cannot do that. A clinical assessment measures hearing thresholds over a range of frequencies, with calibrated equipment and separate results for each ear. Your result here is the highest tone you reported hearing through a particular browser and device at one volume. It does not check speech understanding, middle-ear function or whether the two ears hear equally well. Do not compare the number with someone else's unless you are simply curious about how different setups behave.

If you want to repeat the check, keep the device, browser, room and comfortable volume the same. Stop when a tone is uncomfortable or when you cannot hear it without turning up the sound. A repeat result may differ because of noise or your concentration. If your concern started after a loud event, or you notice a sudden change in either ear, do not wait for a better score online. Ask a hearing professional for an appropriate assessment. A clear explanation of limitations is more useful than a flattering result that the tool cannot substantiate.